Microhard Systems pX2 - Page 101

© Microhard Systems Inc. 101
5.0 AT Command Line Interface
AT+MSNTP
Command Syntax (Effect: AT&W)
Get/Set NTP Server.
AT+MSNTP=<status>[,<NTP server>[.<Port>]]
Status:
0 Local Time
1 NTP
Description
Example
Input:
AT+MSNTP=1,pool.ntp.org<enter>
Response:
OK
AT+MSREB
Command Syntax (Effect: Immediate)
Reboot the pX2.
AT+MSREB <enter>
Description
Example
Input:
AT+MSREB <enter>
Response:
OK. Rebooting...
AT+MSSYSLOG
Command Syntax (Effect: AT&W)
Get/Set syslog server
AT+MSSYSLOG=<Server>[,<Port>]
Server : Valid IP Address or Name. 0.0.0.0 -
Disable. 1 to 256 characters
Port: 1 to 65535. Default is 514
Description
Example
Input:
AT+MSSYSLOG=192.168.168.35,514<enter>
Response:
OK
Input:
AT+MSSYSLOG?
Response:
Syslog Server : 192.168.168.35
Syslog Port : 514
OK