© Microhard Systems Inc. 91
4.0 Configuration
Image 4-8-7: Admin > Discovery
Use this option to disable or enable the discovery service.
Discovery Service Status
Values (selection)
Disable / Enable
4.8.5 Admin > Discovery
Server Status Settings
Microhard Radio employ a discovery service that can be used to detect other Microhard Radio’s on a
network. This can be done using a stand alone utility from Microhard System’s called ‘IP Discovery’ or from
the Tools > Discovery menu. The discovery service will report the MAC Address, IP Address, Description,
Product Name, Firmware Version, Operating Mode, and the SSID.
Specify the port running the discovery service on the pX2 unit.
Server Port Settings
Values (Port #)
20097
Network Discovery
The Network discovery tool allows the pX2 to send a broadcast to all Microhard devices on the same
network. Other units on the network will respond to the broadcast and report their MAC address, IP
address (With a hyperlink to that units WebUI page), description, firmware version.
The discovery service can be a useful troubleshooting tool and can be used to quickly find and indentify
other units on the network.
To Next Page
Loading...