Microhard Systems pX2 - Technical Specifications

© Microhard Systems Inc. 12
1.0 Overview
1.2 Specifications
For detailed specifications, please see the specification sheets available on the Microhard website @
http:///www.microhardcorp.com for your specific model.
Electrical/General
Frequency: 2.4000 - 2.4835 GHz
Link Rate: Up to 150 Mbps
Radio Operation 802.11b/g/n
TX Power: 11 dBm - 30 dBm (Selectable)
Channel Bandwidth: 20 or 40 MHz (Selectable)
Error Detection/Control: ARQ/FEC
Data Encryption*: WEP, WPA(PSK), WPA2(PSK), WPA+WPA2 (PSK)
(May require an export permit)
Range: Up to 10 miles (16km) (Antenna Dependant)
Serial Port: 300bps to 921kbps - RS232 (Tx, Rx, RTS, CTS, DTR, DSR)
Ethernet: Dual 10/100 BaseT, Auto - MDI/X, IEEE 802.3
Network Protocols: TCP, UDP, TCP/IP, ARP, ICMP, DHCP, HTTP, HTTPS*, SSH*,
SNMP, FTP, DNS, Serial over IP
(*May require an export permit)
Operating Modes: Access Point, Client/Station, Repeater, Mesh Point
Management: Local Serial Console, Telnet, WebUI, SNMP, FTP &
Wireless Upgrade
Diagnostics: Status LED’s, RSSI, remote diagnostics, SNR, TX/RX CCQ
Input Voltage: Vcc: 3.3 VDC Nominal (+/- 0.3V)
Vrf: 3.3 to 5.0 VDC (5V for 1W output)
Environmental
Operation Temperature: -40
o
F(-40
o
C) to 185
o
F(85
o
C)
Humidity: 5% to 95% non-condensing
Mechanical
Dimensions: 1.05” (26.5mm) X 1.3” (33mm) X 0.13” (3.5mm)
Weight: Approx. 5 grams
Connectors: Antenna: UFL
Data: 80 Pin SMT