Microhard Systems pX2 - Page 120

© Microhard Systems Inc. 120
5.0 AT Command Line Interface
AT+MWHTMODE
Command Syntax (Effect: AT&W)
Get/Set radio high throughput mode.
AT+MWHTMODE=<High Throughput Mode>
High Throughput Mode:
0 - HT20
1 - HT40-
2 - HT40+
3 - Force HT40-
4 - Force HT40+
Description
Example
Input:
AT+MWHTMODE=2 <enter>
Response:
OK
AT+MWDISTANCE
Command Syntax (Effect: AT&W)
Get/Set radio Wireless Distance.
AT+MWDISTANCE=<Distance>
Distance (m):
Minimum 1
Description
Example
Input:
AT+MWDISTANCE=1000 <enter>
Response:
OK
AT+MWCHAN
Command Syntax (Effect: AT&W)
Set radio channel
AT+MWCHAN=<Channel>
Available radio channels for mode 11ng and high
throughput mode HT20:
0 - auto
1 - 1
2 - 2
3 - 3
4 - 4
5 - 5
6 - 6
7 - 7
8 - 8
9 - 9
10 - 10
11 - 11
Description
Example
Input:
AT+MWCHAN=0 <enter>
Response:
OK