Microhard Systems pX2 - Page 127

© Microhard Systems Inc. 127
5.0 AT Command Line Interface
AT+MWENCRYPT
Command Syntax (Effect: AT&W)
Get/Set radio virtual interface: Encryption Type
For PSK, AT+MWENCRYPT=[<Index>,
[<Encryption Type>[,<PSK Password>]]]
For RADIUS, AT+MWENCRYPT=[<Index>,
[<Encryption Type>[,<RADIUS Server Key>
[,<RADIUS IP Address>,<RADIUS Port>]]]]
<Index>
Radio Virtual Interface Index: 0-3
<Encryption Type>
Radio Virtual Interface Encryption Type:
0 - Disabled
1 - WPA (PSK)
2 - WPA2 (PSK)
3 - WPA+WPA2 (PSK)
4 - WPA Enterprise (RADIUS)
5 - WPA2 Enterprise (RADIUS)
6 - WPA+WPA2 Enterprise (RADIUS)
<PSK Password>:
Min 8 characters, Max 63 characters
<RADIUS Server Key>:
Min 4 characters, Max 63 characters
<RADIUS IP Address>:
Valid IP address
<RADIUS Port>:
Valid port 0 - 65535
Description
Example
Input:
AT+MWENCRYPT=0,1,#microhard123 <enter>
Response:
OK
Input:
AT+MWENCRYPT> <enter>
Response:
+MWENCRYPT: Virtual Interface 0:
Encryption Type: 1 - WPA (PSK)
Password: #microhard123
OK
AT+WSCAN
Command Syntax
Get radio network scan information. (Must be in
client mode, scans for available networks).
AT+WSCAN <enter>
Description
Example
Input:
AT+WSCAN <enter>
Response:
Varies