© Microhard Systems Inc. 54
4.0 Configuration
The Wireless Distance parameter allows a user to set the expected
distance the WiFi signal needs to travel. The default is 100m, so the
pX2 will assume that the signal may need to travel up to 100m so it
sets various internal timeouts to account for this travel time. Longer
distances will require a higher setting, and shorter distances may
perform better if the setting is reduced.
Wireless Distance
Values (meters)
100
Once the RTS Threshold defined packet size is reached, the system
will invoke RTS/CTS flow control. A large RTS Threshold will improve
bandwidth, while a smaller RTS Threshold will help the system recover
from interference or collisions caused by obstructions.
RTS Thr (256 ~ 2346)
Values (selection)
On / OFF
The Fragmentation Threshold allows the system to change the
maximum RF packet size. Increasing the RF packet size reduces the
need to break packets into smaller fragments. Increasing the
fragmentation threshold slightly may improve performance if a high
packet error rate is experienced.
Fragment Thr (256 ~ 2346)
Values (selection)
On / OFF
To Next Page
Loading...