© Microhard Systems Inc. 72
4.0 Configuration
Defines the buffer size that the serial server will use to receive data
from the serial port. When the server detects that the Character
Timeout criteria has been met, or the buffer is full, it packetizes the
received frame and transmits it.
Maximum Packet Size
Values (bytes)
256
When enabled the data will continue to buffer received on the
serial data port when the radio loses synchronization. When
disabled the pX2 will disregard any data received on the serial
data port when radio synchronization is lost.
No-Connection Data
Values (selection)
Disable / Enable
This option will enable or disable the MODBUS decoding and
encoding features.
MODBUS TCP Status
Values (selection)
Disable / Enable
To Next Page
Loading...