Microhard Systems pX2 - Page 96

© Microhard Systems Inc. 96
5.0 AT Command Line Interface
ATH
Command Syntax (Effect: Immediate)
Show a list of previously run commands.
ATH <enter>
Description
Example
Input:
ATH <enter>
Response:
AT Command history: 1. ATH 2. ATL 3. ATH
AT&R
Command Syntax (Effect: Immediate)
Read modem profile to editable profile. (Reserved)
AT&R <enter>
Description
Example
Input:
AT&R <enter>
Response:
OK
ATL
Command Syntax (Effect: Immediate)
Show a list of all available AT Commands.
ATL <enter>
Description
Example
Input:
ATL <enter>
Response:
AT Commands available:
AT AT Echo OK
ATE0 Disable Echo
ATE1 Enable Echo
AT+TEST AT Echo TEST
ATH Show a list of previously run AT commands
ATL List all available AT commands
AT&R Reserved
AT&V Display modem active profile
AT&W Enable configurations you have been entered
ATA Quit
ATO Quit
AT+MSNTP Get/Set NTP server
AT+MSCNTO Get/Set console timeout
.
.
.
<Output Omitted>