SediGraph III 5120 Installation Checklist Description
Mar 2010 31
Part 2: Installation Checklist
Checklist Description
The tables in the checklist contain the columns described below
Column
Description/Action
Procedure Perform the procedure described in this column.
Evaluation Code Circle an evaluation code for each procedure according to the
following criteria:
P = Pass
Indicates that this procedure has been successfully completed without
error.
F = Fail
Indicates that this procedure has been unsuccessful and prevents the
instrument from being installed for use.
N/A = Not Applicable
Indicates that this procedure does not apply to your system.
Initial/Date Enter your initials and the date.
If the procedure was completed by another person, that person should
enter his or her initials and the date.
To Next Page
Loading...
