Micromeritics SediGraph III 5120 Installation Instructions And Checklist

SediGraph III 5120 Installation Performing a Reference Material Analysis
Mar 2010 35
Performing a Reference Material Analysis
Perform a garnet reference material analysis. Record the results listed in the Reference
Material Kit in the Expected Results column below and record the analysis results in the
Actual Results column.
The results must fall within the tolerances in the Expected Results column for the test to pass.
Reference material lot number:_____________
Expected Results Actual Results
Evaluation
Code
Initial/
Date
Mass median equivalent spherical
diameter =__________________
Mass median equivalent spherical
diameter = ______________
P F N/A
90% Mass % finer =________µm
+
___________µm
90% Mass % finer = ___________ P F N/A
10% Mass % finer =________µm
+
___________µm
10% Mass % finer = __________ P F N/A
Mass % finer at 7.00 µm =
_________% +
___________%
Mass % finer at 7.00 µm = _____ P F N/A
Mass % finer at 5.50 µm =
_________% +
___________%
Mass % finer at 5.50 µm = _____ P F N/A
Mass % finer at 5.o0 µm =
_________% +
___________%
Mass % finer at 5.00 µm = _____ P F N/A
Mass % finer at 4.25 µm =
_________% +
___________%
Mass % finer at 4.25 µm = _____ P F N/A
Mass % finer at 3.50 µm =
_________% +
___________%
Mass % finer at 3.50 µm = _____ P F N/A
Mass % finer at 3.00 µm =
_________% +
___________%
Mass % finer at 3.00 µm = _____ P F N/A
Mass % finer at 2.50 µm =
_________% +
___________%
Mass % finer at 2.50 µm = _____ P F N/A
Mass % finer at 2.00 µm =
_________% +
___________%
Mass % finer at 2.00 µm = _____ P F N/A
Mass % finer at 1.50 µm =
_________% +
___________%
Mass % finer at 1.50 µm = _____ P F N/A
Mass % finer at 1.00 µm =
_________% +
___________%
Mass % finer at 1.00 µm = _____ P F N/A

Micromeritics SediGraph III 5120 Specifications

General

Brand	Micromeritics
Model	SediGraph III 5120
Category	Measuring Instruments
Language	English