Micromeritics SediGraph III 5120 Installation Instructions And Checklist

Installing the 5120 Analysis Program SediGraph III 5120 Installation
12 Mar 2010
4. Click OK; the New Installation dialog is displayed.
5. The Destination Folder group box displays the amount of current disk space, the amount
of disk space required for the Micromeritics software, and the folder into which the
application will be installed.
If the default location is not acceptable, click
Browse to choose the folder.
6. If you want to run the Micromeritics software from the desktop, select the checkbox just
below the Destination Folder group box to add an icon to the desktop.
7. The Micromeritics software icon is added to the Micromeritics folder by default. If you
prefer a different folder, enter or select one from the drop-down list.
8. The Install this application for All Users check box indicates whether users other than
the installer will be able to access the application from the Windows Start menu.
If the box is checked, the application can be accessed from the Windows Start menu by all
users who are logged onto Windows. If the box is not checked, the application can be
accessed from the Windows Start menu only by the user who installed the application.
You may cancel the installation at any time by selecting Exit. If you do so, you must
start the installation program from the beginning to install the Micromeritics software

Micromeritics SediGraph III 5120 Specifications

General

Brand	Micromeritics
Model	SediGraph III 5120
Category	Measuring Instruments
Language	English