Microsemi PDS-104G - Network Configuration; Configure Unit Ipv4, Ipv6 and Host Name Parameters

PDS-104G PoE Switch
Power Over Ethernet PowerView Pro User Guide
Copyright © 2016 Microsemi Page 15 of 48
Rev. 1.0 CPG – PoE BU
One Enterprise Aliso Viejo, CA 92656 USA
Figure 3-7: Security Configuration
User Name
Unit user name for remote Web/Telnet/SSH access
Password
Unit password for remote Web/Telnet/SSH access
Telnet/SSH
Enable remote login via Telnet or SSH
Web Encryption
Force all web pages to become encrypted over SSL/TLS
3.3.3 Network Configuration
Configure unit IPv4, IPv6 and host name parameters.
Figure 3-8: Network Configuration
3.3.3.1 IPv4 Network Configuration
Enable DHCPv4
Obtain IPv4 address from DHCPv4 Server
IPv4 Address
Static IPv4 address whenever DHCPv4 is off
IPv4 Subnet Mask
Static IPv4 mask whenever DHCPv4 is off
IPv4 Default Gateway
Static IPv4 default gateway whenever DHCPv4 is off
3.3.3.2 IPv6 Network Configuration