PDS-104G PoE Switch
Power Over Ethernet PowerView Pro User Guide
Copyright © 2016 Microsemi Page 28 of 48
Rev. 1.0 CPG – PoE BU
One Enterprise Aliso Viejo, CA 92656 USA
4.2.3 Telnet/SSH – View Unit Information
View Unit Information – provides a summary of unit production parameters such as software version, Boot
version, product type, etc.
Figure 4-5: Telnet/SSH View Unit Information
Unit marketing part number (PDS-104GO/M/AC)
Unit six-digit serial number
Unit production number (for internal use only)
Network Manager software version
Network Manager Boot version
PoE firmware version which is responsible for PoE functionality
The time passed since the unit was reset/powered up
Unit GMT time as it was obtained from NTP Server. Whenever unit is
unable to obtain NTP time from NTP Server, the message "incorrect" will
appear
Unit local time (GMT time plus time zone shift). Whenever unit is unable to
obtain NTP time from NTP Server, the message "incorrect" will appear