Microsemi PDS-104G - Copyright

PDS-104G PoE Switch
Power Over Ethernet PowerView Pro User Guide
Copyright © 2016 Microsemi Page 36 of 48
Rev. 1.0 CPG – PoE BU
One Enterprise Aliso Viejo, CA 92656 USA
occurred.
10
PoE controller has no firmware –
will be sent in case PoE controller
firmware will be erased or become
corrupted.
11
Invalid Telnet Telnet/SSH -
remote user tried to access the unit
by Telnet Telnet/SSH with incorrect
username/password.
Remote user IPv4/IPv6 address
12
DHCPv4 – Will be sent only upon
the 1
st
first time DHCPv4 address
was obtained either by switching
from static to DHCPv4 or on power-
up.
 Unit Hostname
 Unit MAC Address
DHCPv4 address
Broadcast SysLog
message sent to IPv4
255.255.255.255
13
DHCPv6 – Will be sent only when
the first time DHCPv6 address was
obtained either by switching from
static to DHCPv6 or on power-up.
 Unit Hostname
 Unit MAC Address
 DHCPv6 address
Broadcast SysLog
message sent to IPv4
255.255.255.255
: