Microsemi PDS-104G - Organization; Conventions; Related Documentation; Abbreviations

PDS-104G PoE Switch
Power Over Ethernet PowerView Pro User Guide
Copyright © 2016 Microsemi Page 6 of 48
Rev. 1.0 CPG – PoE BU
One Enterprise Aliso Viejo, CA 92656 USA
1.3 Organization
This guide is divided into the following sections:
 Section 1: Defines the concepts used, conventions used and associated documentation
 Section 2: Outdoor Power View Pro features and capabilities
 Section 3: Complete system installation procedure
 Section 4: Outdoor PowerView Pro Web interface detailed description
 Section 5: SNMP monitoring and configuration
 Section 6: Syslog message report
 Section 7: Upload/download unit configuration over TFTP
 Section 8: Software update
 Section 9: Recovering from unknown username, password
 Section 10: Troubleshooting
1.4 Conventions
The various conventions used in defining commands and examples are given in the following table.
CONVENTION
DEFINITION
bold
Keywords and commands
italics
Represents a Web interface item
screen
Displayed Information
Courier text
Information to be entered
Notes
Helpful information
1.5 Related Documentation
For additional information, refer to the following documentation:
 Product user installation guide
 Technical Note 132: Using RFC3621 PoE MIB with Microsemi Unit.
 RFC3621 SNMP MIB, and private MIB
 Creating Certificate for PDS-104G Secured Web Server
1.6 Abbreviations
Table 1-1: List of Abbreviations
IPv4
32-bit long IP address
IPv6
128-bit long IP address
DHCPv4
Dynamic IPv4 Host Configuration Protocol
DHCPv6
Dynamic IPv6 Host Configuration Protocol
PoE
Power over Ethernet
NTP
Network Time Protocol
DES
Data Encryption Standard
MD5
Message Digest algorithm
SHA
Message Digest algorithm
MDI
Media Dependent Interface
SSL
Secure Sockets Layer
TLS
Transport Layer Security
MIB
Management Information Base
PD
Powered Device
SNMP
Simple Network Management Protocol
TFTP
Trivial File Transfer Protocol