Microsemi SyncServer S300 - Page 183

Configuring SNMP
STATUScurrent
DESCRIPTION
"This is the root object identifier for SNMP based objects."
::= {symmNetworkManagement 2 }
symmTimePictra OBJECT-IDENTITY
STATUScurrent
DESCRIPTION
"This is reserved for objects related to Symmetricom's TimePictra
products."
::= {symmSnmpManagement 1 }
symmBroadband OBJECT-IDENTITY
STATUScurrent
DESCRIPTION
"The subtree that contains objects related to Symmetricom's GoWide
products."
::= {symmSnmpManagement 2 }
symmTTM OBJECT-IDENTITY
STATUScurrent
DESCRIPTION
"The subtree that contains objects related to Symmetricom's
Timing, Test and Measurement products."
::= {symmSnmpManagement 3 }
productsOBJECT IDENTIFIER ::= {symmTTM 1}
experimentOBJECT IDENTIFIER ::= {symmTTM 99}
ts2000OBJECT IDENTIFIER ::= {products 1}
ntsOBJECT IDENTIFIER ::= {products 2}
ts2100OBJECT IDENTIFIER ::= {products 3}
s100OBJECT IDENTIFIER ::= {products 4}
syncserverOBJECT IDENTIFIER ::= {products 5}
xliOBJECT IDENTIFIER ::= {products 6}
versionOBJECT IDENTIFIER ::= {syncserver 1}
ntpSystemOBJECT IDENTIFIER ::= {version 1}
tymingOBJECT IDENTIFIER ::= {version 2}
gpsOBJECT IDENTIFIER ::= {version 3}
dialupOBJECT IDENTIFIER ::= {version 4}
netOBJECT IDENTIFIER ::= {version 5}
etcOBJECT IDENTIFIER ::= {version 6}
ntpSysLeap OBJECT-TYPE
SYNTAX INTEGER {
noWarning(0),
addSecond(1),
subtractSecond(2),
alarm(3)}
ACCESS read-only
STATUS current
DESCRIPTION
997-01520-02 Rev. F1.......................................................................... Page 183