1
+ Safety Precautions
To ensure safety, please follow safety precautions when operating and repairing the device. It is
seriously against the safety standard of design, manufacturing, and operation of the device if the
user fails to follow precautions and warnings in this manual.
+ Precautions for Repair
DO NOT remove the protective housing. Only a qualified member of the maintenance staff can
conduct jobs like component replacement or internal commissioning.DO NOT replace any
component when the device is plugged in. Under certain special circumstances, dangerous voltage
may still exist even when the device is unplugged.To ensure personal safety, please turn off the
power and follow the essential discharging method before accessing the inside.
+ Instrument Grounding
Please ground the power cable to avoid the danger of electric shock.
+ DO NOT Conduct Jobs Like Maintenance or Internal Commissioning Alone
DO NOT conduct jobs like internal maintenance or commissioning alone.
+ DO NOT Replace Any Component or Modify Device Function and Structure
Without Permission
Without authorization from our Company, do not install replacement components or perform any
modifications to this machine on your own in order to avoid increasing the danger of the machine
or causing damage to the machine. When the instrument malfunctions, please send the machine
back to Microtest Corporation to have professionals repair it for you in order to ensure safety.
+ Warranty Period
Microtest Corporation provides a one-year quality guarantee from the purchase day. However, the
warranty period of certain special components should be based on the specifications and this
one-year period is not applicable. Within the warranty period, Microtest Corporation is responsible
for repair or replacing the proven defective products (a good/defective product shall be judged by
Microtest Corporation). Microtest Corporation guarantees that as long as the complementary
software/hardware specified by Microtest is properly installed on the instrument, the
software/hardware is capable of running the commands. Microtest Corporation does not
guarantee no interruption or error during software/hardware operation.
+ Product Guarantee Limits
The above guarantee is not applicable to the incorrect or improper use of the product or any
modification, repair, component replacement, or misuse of the product without authorization. This
guarantee shall not be applied to the case when the product is not installed or repaired under the
specified environment conditions.
Microtest Corporation all rights reserved.
Declaration: Microtest Corporation reserves the right to modify the contents of this manual
without further notice!
To Next Page
Loading...
Need help?
General
