Microtest 6363 - List:rescan <Nr1; List:rescan; List:step <Nr1

73
:LIST:RESCAN <NR1>
Set the time for continual test and continual test intervals in Multi-Step Test Mode.
 When the value is set as 0, the continual test function is disabled.
 When the value is set between 1-100, the continual test function is enabled and the time for
continual test intervals is the value set x100mS.
Parameters: Setting range is from 0-100.
Example:
:TRAN:RESCAN 0
:LIST:RESCAN?
Query the time for continual test and continual test intervals in Multi-Step Test Mode.
 When the value is set as 0, the continual test function is disabled.
 When the value is set between 1-100, the continual test function is enabled and the time for
continual test intervals is the value set x100mS.
Responses: Return current setting value (0-100).
Example:
:TRAN:RESCAN? Return 0
:LIST:STEP <NR1>
Set the steps of multi-step list mode programming.
Parameters:
1-8 (Set current multi-step list mode programming to Steps 1-8)
Example:
:LIST:STEP 1
Current multi-step list mode programming is Step 1.
:LIST:STEP8
Current multi-step list mode programming is Step 8.