Microtest 6363 - List:comp:upp <Nr3; List:comp:upp; LIST:COUN <Disc

67
:LIST:COMP:UPP <NR3>
Set the maximum of the multi-step list mode.
Parameters:
<NR3> (Setting range -999G - +999G)
MAX Set as maximum value (+999G).
MIN Set as minimum value (-999G).
Example:
:LIST:COMP:UPP 1000
:LIST:COMP:UPP 1k
:LIST:COMP:UPP MAX
:LIST:COMP:UPP?
Query the maximum of the multi-step list mode.
Responses: <NR3> scientific notation format is used for the return format.
Example:
:LIST:COMP:UPP? Return 1.000000E+03
:LIST:COUN <disc>
Set if the PASS/FAIL counter function is enabled under the multi-step test mode.
Parameters:
ON Enable the Multi-Step Test Mode Counter.
OFF Disable the Multi-Step Test Mode Counter.
Example:
:LIST:COUN ON