Microtest 6363 - Chapter 2. Begin; Characteristics; Introduction; Communication Interface

7
Chapter 2. Begin
2.1 Characteristics
 Test Frequency:
10Hz~20kHz (6363) ／ 10Hz~100kHz (6364)
10Hz~200kHz (6365) ／ 0.1Hz~200kHz (6365A)
10Hz~500kHz (6366) ／ 0.1Hz~500kHz (6366A)
10Hz~1MHz (6367) ／ 0.1Hz~1MHz (6367A)
 Test Voltage: 10mV~2V.
 Basic Measurement Accuracy: 0.05%.
2.2 Introduction
 Multi-step Measurement: Measure up to eight steps.
 Measured using the absolute value (ΔAbs) or percentage difference (Δ%) relative to the
nominal value.
 High precision measurement fixture with four-wire connection and grounding.
 Fixture reset (open circuit/short circuit).
 Bar display makes it easy to determine variable components.
 Seven-inch LCD color monitor, 800x480 screen resolution.
 Intuitive user interface with complete measurement functions.
2.3 Communication Interface
 RS-232 Serial Communication Port(9600/19200/38400/56000/115200 bps).
 GPIB.
 LAN.
 Handler interface