Microtest 6363 - List:freq; LIST:PARA <Disc

71
:LIST:FREQ?
Query the measurement frequency of the multi-step compare function.
Responses:
<NR3> scientific notation format is used for the return format.
Example:
: LIST:FREQ? Return 1.000000E+03
:LIST:PARA <disc>
Set the measurement parameters of the multi-step list mode.
Parameters:
Parameter definitions are as follows:
OFF Disable this measurement.
LS Serial Inductance (Ls)
LP Parallel Inductance (Lp)
CS Serial Capacitance (Cs)
CP Serial Capacitance (Cp)
RS Serial Resistance (Rs)
RP Serial Resistance (Rp)
X Reactance (X)
B Susceptance (B)
Z Impedance (Z)
Y Admittance (Y)
D Dissipation Factor (D)
Q Quality Factor (Q)
DEG Phase Angle (θ)
G Conductance (G)
RDC Direct Current Resistance (Rdc)
Example:
:LIST:PARA Z
Set the test item as Z.
:LIST:PARA OFF
Set the test item as OFF.