Microtest 6363 - Cal:open:DC; Cal:open:spot; Cal:short:all

45
:CAL:OPEN:DC?
Execute open circuit calibration for direct current (DC), and read the execution results.
Responses:
OK (Calibration successful)
NG (Calibration failed)
Example:
:CAL:OPEN:DC? Return OK
:CAL:OPEN:SPOT?
Executes open circuit correction for the alternating current (AC) of the current frequency, and
reads the execution results.
Responses:
OK (Calibration successful)
NG (Calibration failed)
Example:
:CAL:OPEN:SPOT? ReturnOK
:CAL:SHORT:ALL?
Execute short circuit calibration between 10Hz-200kHz frequency and read the execution results.
Responses:
OK (Calibration successful)
NG (Calibration failed)
Example:
:CAL:SHORT:ALL? ReturnOK