75
:LIST:VOLT <NR3 | disc>
Set the measurement voltage of the multi-step list mode.
Parameters:
0.01-2.0 (Voltage setting range 10mV-2.0V)
MAX Set voltage as 2.0V.
MIN Set voltage as 10mV.
Example: :LIST:VOLT 1
:LIST:VOLT 1V
:LIST:VOLT 100mV
:LIST:VOLT 1E-1
:LIST:VOLT MAX
:LIST:VOLT MIN
:LIST:VOLT?
Query the measurement voltage of the multi-step list mode.
Responses:
<NR3> scientific notation format is used for the return format.
Example:
:LIST:VOLT? Return 1.000000E+00
:TRIG
(Triggers a direct measurement) Trigger one measurement without returning to the result.
※ Can be used for Meter Mode and Multi-Step Test Mode.
Example:
:TRIG
To Next Page
Loading...
Need help?
General
