Microtest CT-8700 - II.1.D.B CONDUCTANCE CALIBRATION

CHAPTER
CHAPTER CHAPTER
CHAPTER Ⅱ
ⅡⅡ
Ⅱ System Function & Configuration
System Function & Configuration System Function & Configuration
System Function & Configuration
P 13
II.1.C.a
II.1.C.a II.1.C.a
II.1.C.a Conductance
 Operation Procedure
(a) Press [Func] using [↑] or [↓] to select the item
(b) Press [Enter], LCD display as following
(c) Press [↑] or [↓] to select (1) Conductance and press [Enter],
LCD display as following
(d) Press S1[PROG] to transform Port:A/B/C
(e) Press S6 [CAL.PIN], to run calibration pin. and press [Exit] to return