Microtest CT-8700 - II.1.D.e INSULATION CALIBRATION

CT
CTCT
CT-
--
-8700
87008700
8700 User
User User
User’s Guide
s Guides Guide
s Guide
P 16
II.1.C.d
II.1.C.d II.1.C.d
II.1.C.d Withstanding
 Operation Procedure
(a) The operation is the same conductance, in the subordinate menu of meter
mode using [↑] or [↓] to select (4) Withstanding, LCD display as
following:
(b) Press the [Enter] LCD display as following
(c) Press S3 [ON/OFF] to turn ON/OFF the H/V output
(d) Press S6 [CAL.PIN] to run Calibration function
(e) Press [Exit] to return to the meter select menu