CHAPTER
CHAPTER CHAPTER
CHAPTER Ⅱ
ⅡⅡ
Ⅱ System Function & Configuration
System Function & Configuration System Function & Configuration
System Function & Configuration
P 31
(d) Press S1[SET]
(e) Key in a exact date and time
(f) Complete it then press [Enter] to leave
Hour is 24-hours mode setting
II.2.D
II.2.D II.2.D
II.2.D
Password Setup
You can set a system password to protect setting from revision.
Operation Procedure
(a) Press [Sys] and using [↑] or [↓] to select this item
(b) LCD display as following
(c) Press [Enter], LCD display as following
(d) Key in a initial password and press [Enter]
(e) Key in a new password and press [Enter]
(f) Key in new password again and press [Enter] to confirm, the screen will
display {success}
(g) When new password setup has been done the screen will return to the
selection menu
(h) Repeat (c)-(f) steps and input the proper password to protect data
To Next Page
Loading...