Miele PWM 908 User Manual

Before using for the first time
23
Setting up a payment system
If you wish to set up a payment system,
read “Payment system” under “Super-
visor level”.
These settings can only be changed
during the initial commissioning pro-
cess. If you wish to change the settings
after the commissioning process,
please contact Miele Service.
If you do not wish to set up a payment
system, you can skip this stage.
11:02
No payment
system
Payment system
OK
Programme
control
Timed
operation
COM module
 Touch the No payment system sensor
control.
The display will change to the next set-
ting.
Select pre-wash water
11:02
Cold
Pre-wash
OK
Hot
 Touch the cold sensor control if the
washing machine is only connected
to a cold water supply, or touch hot if
the washing machine is connected to
cold and hot water.
The display will change to the next set-
ting.
Select main wash water
11:02
Cold
Main wash
OK
Hot
 Touch the cold sensor control if the
washing machine is only connected
to a cold water supply, or touch hot if
the washing machine is connected to
cold and hot water.
Further information will appear on the
display.

Miele PWM 908 Specifications

General

Door hinge	Right
Water fill	Cold, Hot
Drum volume	73 L
Control type	Touch
Loading type	Front-load
Certification	CE, VDE-EMV, VDE, WEEE, IPX4
Product color	Silver
Built-in display	Yes
Custom panel-ready	-
Door opening angle	167 °
Appliance placement	Freestanding
Package depth	768 mm
Package width	660 mm
Package height	940 mm
Package weight	107000 g
Current	10 A
Connected load	5500 W
AC input voltage	400 V
AC input frequency	50 Hz
Water consumption per cycle	- L
Energy consumption washing per cycle	- kWh
Drum capacity	8 kg
Delay start (max)	96 h
Spin-drying class	A
Maximum spin speed	- RPM
Noise level (spin)	70 dB
Noise level (wash)	46 dB

Weight and Dimensions

Depth	714 mm
Width	605 mm
Height	850 mm
Weight	103000 g