Miele PWM 908 User Manual

Before using for the first time
24
Removing the transit bars
The display will remind you to remove
the transit bars.
 Damage resulting from failure to
remove the transit bars.
Failure to remove the transit bars can
result in damage to the washing ma-
chine and to adjacent furniture or ap-
pliances.
Remove the transit bars as described
in “Installation”.
 Confirm that the transit bars have
been removed with the OKsensor
control.
Continue setting up as described in the Op-
erating instructionsappears in the display.
 Confirm the message with the OK
sensor control.
Completing commissioning
To complete commissioning, the Col-
oured items 60°C programme must be
run without laundry and without deter-
gent.
If the power is interrupted prior to the
start of the first wash programme (e.g.
if the machine is switched off with the
 button), the initial commissioning
process can be completed again.
Once a wash programme has been
running for over 20minutes, the initial
commissioning process does not have
to be performed again.
 Open the stopcocks.
 Touch the Programmes sensor control.
 11:02
Whites Minimum iron Express
Coloured
items
Delicates Woollens
Programmes
 Touch the Coloured items sensor con-
trol.
 11:02
60 °C 1600

0:59
Coloured
items
h
Overview
Temperature Spin speed
Extras
not selected
 Timer
CapDosing
rpm
not selected
 Touch the Start/Stop sensor control.
When the programme has finished, your
machine is ready for use.
If you have activated disinfection
programmes, you must complete the
Thermal disinfection programme as
the first programme; make sure you
use a suitable detergent but do not
load the machine.

Miele PWM 908 Specifications

General

Door hinge	Right
Water fill	Cold, Hot
Drum volume	73 L
Control type	Touch
Loading type	Front-load
Certification	CE, VDE-EMV, VDE, WEEE, IPX4
Product color	Silver
Built-in display	Yes
Custom panel-ready	-
Door opening angle	167 °
Appliance placement	Freestanding
Package depth	768 mm
Package width	660 mm
Package height	940 mm
Package weight	107000 g
Current	10 A
Connected load	5500 W
AC input voltage	400 V
AC input frequency	50 Hz
Water consumption per cycle	- L
Energy consumption washing per cycle	- kWh
Drum capacity	8 kg
Delay start (max)	96 h
Spin-drying class	A
Maximum spin speed	- RPM
Noise level (spin)	70 dB
Noise level (wash)	46 dB

Weight and Dimensions

Depth	714 mm
Width	605 mm
Height	850 mm
Weight	103000 g