To Next PageTo Next Page
Need help?Do you have a question about the MILACRON MFC-G and is the answer not in the manual?
Procedures for receiving and inspecting the temperature control unit upon delivery.
Essential safety precautions for installation, operation, and maintenance.
General guidelines and considerations for installing the temperature control unit.
Procedures and warnings for making the necessary electrical connections.
Step-by-step procedure for starting up and operating the unit.
Identification and explanation of fault screens and their causes.
Procedures for safely shutting down and disconnecting the unit.
Diagnosing issues when the unit display remains blank upon power-up.
Diagnosing issues when the unit display is on but the unit won't start.
Identifying reasons why the unit might stop operating unexpectedly.
Troubleshooting steps for situations where the unit is overheating.
Diagnosing issues when the unit fails to reach the desired temperature.
Troubleshooting faults related to the AVT™™ cooling valve operation.
Step-by-step guide for replacing the pump seal assembly.
Procedure for replacing the unit's heater element.
Instructions for servicing the AVT™™ modulating cooling valve.
Steps for servicing or replacing the temperature sensor probe.
General| Model | MFC-G |
|---|---|
| Manufacturer | MILACRON |
| Input Voltage | 100-240 VAC |
| Frequency | 50/60 Hz |
| Operating Temperature | 0-50°C |
| Communication Interface | RS-485 |
| Control Method | PID |
| Type | Temperature Controller |
| Humidity | 20-80% RH, non-condensing |
| Protection Features | short circuit protection |
