Temperature Control Units : MFC with G Series Instrument
Page: 92
Milacron Process Support Business
4165 Halfacre Road Batavia, Ohio 45103
Phone: 513-536-2584
www.milacron.com
8.11 STANDARD MFC--G ENGLISH FACTORY DEFAULT SETTINGS
Set Points
Temperature Set Point 100°F
Hi Deviation 10°F
Low Deviation 10°F
Low Flow 0 GPM
Network
Protocol SPI
Baud Rate 9600
Address 1
Features
Auto Vent Time 45 Seconds
Auto Vent Temperature 100°F
Pump Seal Cooling Disabled
Pump Seal Cooling Time 60 Seconds
Pump Seal Cooling Temperature 100°F
Flow
Flow Disabled
Flow Offset -3 GPM
Flow Calibration 770
Options
Mold Purge Disabled
Remote Start-Stop Enabled
Machine
Cooling Valve Size : 1/2" 500:1
Cooling Valve Size : 3/4" 1000:1
Max Set Point 250°F
Units English
Heat Only Mode Disablced
To Next Page
Loading...
