Temperature Control Units : MFC with G Series Instrument
Page: 65
Milacron Process Support Business
4165 Halfacre Road Batavia, Ohio 45103
Phone: 513-536-2584
www.milacron.com
6. Adjust the potentiometer until the “to process” temperature on the display equals
the temperature of the ice bath.
7. When the two temperatures are equal, the calibration procedure is complete.
8. Stop the unit following the shutdown procedure described in the manual
and place all process probes back in the unit to return to normal operation.
Calibration
potentiometer
To Next Page
Loading...
