Miller Auto-Line Invision 352 MPa - Power Interconnect Board PC2 Testing Information (Use with Section 8-24)

Always check unit before applying power (see Sections 8-2 thru 8-11).
TM-246193 Page 52 Invision 352 MPa
8-23. Power Interconnect Board PC2 Testing Information (Use with Section 8-24)
Ref. 258043-C / 907161
! Measure voltage of input
capacitors according to
Section 8-3, and be sure
voltage is near zero before
touching any parts.
Be sure plugs are secure before
applying power. See Section
8-24 for specific values during
testing.
1 Power Interconnect Board
PC2
Test Equipment Needed:
1