TM-246193 Page 3
Invision 352 MPa
SECTION 2 − DEFINITIONS
2-1. Manufacturer Safety Symbols And Definitions
Some symbols are found only on CE products.
Warning! Watch Out! There are possible hazards as shown by the symbols.
Safe1 2012−05
When power is applied failed parts can explode or cause other parts to explode.
Safe26 2012−05
Wear dry insulating gloves. Do not touch electrode with bare hand. Do not wear wet or damaged gloves.
Safe2 2017−04
Protect yourself from electric shock by insulating yourself from work and ground.
Safe3 2017−04
Disconnect input plug or power before working on machine.
Safe5 2017−04
Keep your head out of the fumes.
Safe6 2017−04
Use forced ventilation or local exhaust to remove the fumes.
Safe8 2012−05
Use ventilating fan to remove fumes.
Safe10 2012−05
Keep flammables away from welding. Do not weld near flammables.
Safe12 2012−05
To Next Page
Loading...
