Complete Parts List is available at www.MillerWelds.com
OM-262506 Page 16
Do not work on unit if engine is running. Stop engine first.
Safe21 2012−05
Do not smoke while fueling or if near fuel.
Safe22 2012−05
Stop engine before fueling.
Safe23 2012−05
Do not fuel a hot engine.
Safe24 2012−05
Use lift eye to lift unit and properly installed accessories only, not gas cylinders. Do not exceed maximum lift eye
rating (see Specifications).
Safe25 2012−05
Do not use ether or other starting fluids. Using starting fluids voids warranty. See engine Owner’s Manual.
Safe89 2015−02
Hot muffler and exhaust pipe can cause severe burns.
Safe90 2012−07
Welding, cutting, drilling, or grinding on base can cause fire or explosion.
Safe91 2012−07
Do not discard product (where applicable) with general waste.
Reuse or recycle Waste Electrical and Electronic Equipment (WEEE) by disposing at a designated collection
facility.
Contact your local recycling office or your local distributor for further information.
Safe37 2012−05
Wear hat and safety glasses. Use ear protection and button shirt
collar. Use welding helmet with correct shade of filter. Wear complete
body protection.
Safe38 2012−05
Kasjf;laksf;lkasdf'l;aksdf;lkasd;flksadflkasd;lk
Kasjf;laksf;lkasdf'l;aksdf;lkasd;flksadflkasd;lk
Kasjf;laksf;lkasdf'l;aksdf;lkasd;flksadflkasd;lk
Become trained and read the instructions before working on the
machine or welding.
Safe40 2012−05
To Next Page