MIMAKI CG-100SR2 User Manual

10
Configuration and function
The Rear
Clamp pressure lever
This lever adjusts the force
by which the clamp is held.
Tray
Small tools, such as a retractable
knife and other cutters, can be
placed on.
Roll bar
A roll sheet is placed on the two
roll bars. ( P.28)
AC inlet
The power cable is
connected to the AC
inlet.( P.13)
Sheet sensor
This sensor detects the
presence of the sheet and
sheet length.
Roll stay
Roll stays support the
roll bars. ( P.28)
USB / RS-232C
interface connector
The USB and RS-232C
interface connector.
(P.12)

MIMAKI CG-100SR2 Specifications

General

Brand	MIMAKI
Model	CG-100SR2
Category	Cutter
Language	English