MIMAKI CG-100SR2 User Manual

37
Making sticker with a register mark (When using SimpleCut)
1
Make frame around the image.
• Make frame with an attached plug-in soft
“SimpleCut”
2
Make register mark.
• Make register mark at corners of image.
• Cutting start position is settled according to
the register mark.
• Use “SimpleCut” to make a register mark.
• Refer to P.39 to P.42 for the limitation of
making a register mark.
3
Print the image with register mark.
4
Load the sheet to CG-SRII.
• Refer to P.23 for loading the sheet.
5
Send the data with “SimpleCut”
from computer, and cut.
• For the operation of plug-in software SimpleCut, refer to the operation manual provided with a
SimpleCut CD-ROM.
Use
“Rectangle” to
make a frame.
Fframe
Use “Register
Mark” to make
a register mark.
Register Mark

MIMAKI CG-100SR2 Specifications

General

Brand	MIMAKI
Model	CG-100SR2
Category	Cutter
Language	English