Safety Precautions
7
Safety Labels
A safety label is stuck on the machine. The label informs the user of possible risks associated with the
machine.
Be sure to understand the correct meaning of the safety label to avoid danger.
If the safety label is illegible due to stains or has come off, purchase a new one from your local distributor or
our office. (Reorder: No.M904451, Safety label)
Depending on the manufacturing time, the label differs. When reordering the label, please ask for
M904451 as a order number.
CAUTION
Be careful with the movable parts Caution with cutters
• Do not touch the rolling grit roller;
otherwise, you may hurt your fingers or tear
off your finger nails.
• Do not touch the cutter blade, which is very
sharp.
• Do not shake or swing the cutter holder;
otherwise, the blade may come off.
• Keep your head and hands away from any
moving parts during cutting (plotting)
operation; otherwise, you may get your hair
caught in the machine or get injuries.
Caution with cutters
• Be sure to connect the ground wire.
Using without the ground wire causes the
damage of this device and electric shock
that may be very dangerous.
• Regarding the use of two polar plug outlet,
you must connect the auxiliary ground
adapter to the plug of power cable.
Earth the green wire (ground wire) of the
ground adapter. If you cannot, consult with
an electrician.
• Wear proper clothes. (Do not wear loose-fit
clothes or accessories). Bind a long hair.
Sheets
• Straighten the sheet of media, if
significantly curled, before using it for
printing. Heavily curled sheet affects the
cutting (plotting) result.
To Next Page
Loading...
Need help?
General
