Chapter 6 Appendix
6-2
Specifications
Machine specifications
Item Specifications
Print head
Method Drop-on-demand piezoelectric print heads
Specification 4 heads: 2-layered staggered arrangement in 2-line
Drawing
mode
(scan x
feed)
Single-layer
tarpaulins
300x600:Bi/Uni 2/ 4/ 6 pass (only normal mode)
450x600:Bi/Uni 2/ 4/ 6 pass (only normal mode)
300x900:Bi/Uni 3/ 6/ 8/ 12 pass (only normal mode)
PVC film/
600x600:Bi/Uni 4/ 8/ 12/ 16/ pass
600x900:Bi/Uni 6/ 12/ 16/ 24 pass
900x1200
:Bi/Uni
8/ 16/ 24/ 32 pass
Usable inks CS100 ink (M,C,Y,K) / CS200 ink (M,C,Y,K)
Ink supply Supplying 3L x 4 bottles
Capacity of ink tank 3L-bottle x 1 for each color
Media type PVC film/ tarpaulins
Max. printing width 3200mm (126.0 in)
Roll Media
size
Maximum
3250mm (
1524 mm each when twin rolls are set. 1620 mm when roll holders are used.
)
(128.0in (
60.0in each when twin rolls are set. 63.8in when roll holders are used.
))
Minimum 210mm (8.3in)
Thickness 1mm (0.04in) or less
Roll outside diameter
When using take-up unit and feeding unit:Φ250mm (Φ9.8in) or less
When using the roll holder:Φ180mm (Φ7in) or less
Roll weight
*1
When using feeding unit:100kg (220.5lb) or less
When using roll holder:25kg (39.7lb) or less
Roll inside diameter
When using take-up unit and feeding unit:3 inches
When using roll holder:2 or 3 inches
Printing surface Regardless of inside and outside
Roll end treatment
The roll end is gently fixed to the core with weak-adhesive tape or weak glue
for easy removal.
Leaf media
size
Maximum 3250mm (128.0in)
Minimum 210mm (8.3in)
Margin
Leaf media
Left end and right end : 15 mm (Default) Front : 1400 mm Rear : 1300 mm
(Left end and right end : 0.6in (Default) Front : 55.1in Rear : 51.2in)
Roll media
Left end and right end : 15 mm (Default) Front : 1600 mm Rear : 1300 mm
(Left end and right end : 0.6in (Default) Front : 63.0in Rear : 51.2in)
Distance
accuracy
Reproducibility
Whichever the larger one of ± 1.5 mm (0.06in) or ± 0.3 % of the designated
*2
*3
*4
Perpendicularity ± 0.5 mm (0.02in) / 1000 mm (39.4in)
*1 *2
Media skew 5 mm (0.2in) or less / 10 m (393.7in) variable
*1 *2
Head height adjustment 1.7, 1.9, 2.6, 3.3 mm (0.070,0.074, 0.10, 0.13in)
Media delivery
Take-up device supplied as a standard accessory
(switching possible between face in and face out
*5
).
Waste ink tank Tank type (10 liter)
Interface USB 2.0, Ethernet
Command MRL V
Noise
*6
during standby Less than 58 dB (FAST-A, Front & Rear & Left & Right 1 m)
during continuous printing Less than 65 dB
during discontinuous printing Less than 70 dB
Power AC200 - 240 ± 10% , 50/60Hz ± 1Hz , 29A or less
To Next Page
Loading...
