MIMAKI SWJ-320EA - Nozzle Missing Troubleshooting

4-12
Chapter 4 Maintenance
6
Wipe ink sticking to the side of the head off
with a clean stick.
• Never rub the nozzles.
7
After the cleaning, close the left side
maintenance cover then press the
key.
• After its initial operation, the machine returns to
Local.
When nozzle missing
Cannot Be Solved
When nozzle missing cannot be solved even after the
head cleaning ( P.2-19) has been done, perform the
following three functions:
Washing the Head Nozzle
Perform cleaning of the nozzles in the heads to prevent
them being clogged with coagulated ink.
1
Press the
(TEST PRINT/CLEANING)
,
and press the key in Local.
2
Press to select “Station”, and
press the key.
• The Station MENU appears.
3
Press to select “Nozzle Wash”,
and press the key.
• Press the [ENTER] key in the Execution Check
screen, and the carriage moves over the platen.
The nozzle part (Never touch it.)
Clean the side surface of the head (shown in
deep gray) with a clean stick.
Clean with a clean stick or
a waste cloth.
Nozzle Wash
• Wash the head nozzle. ( P.4-12)
Nozzle
Recovery
• Alternative nozzles for printing, when
nozzles missing can not be improved.
(P.4-13)
Sub Tank
• Fill the head with ink. ( P.5-4)
Carriage