MIMAKI SWJ-320EA - Maintenance Menu Overview

4-5
4
2
Chapter 4 Maintenance
About Maintenance MENU
This provides various settings for doing maintenance on the machine.
The following items can be set in Maintenance settings.
Test Print
>
> Cleaning
>
Station
Test Print
>
> Cleaning
>
Station
Test Print
>
> Cleaning
>
Station
>><<
< page
>><< >><< >><< >><<
Maintenance
Station
>
> Nozzle Recovery
>
Auto Maint.
>
Sub Tank
>
Air PG
>><<
MENU
Setup
>
> Maintenance
>
Machine Setup
>
Information
>><<
Maintenance
Station
>
> Nozzle Recovery
>
Auto Maint.
>
Sub Tank
>
Air PG
Maintenance
Station
>
> Nozzle Recovery
>
Auto Maint.
>
Sub Tank
>
Air PG
Maintenance
Station
>
> Nozzle Recovery
>
Auto Maint.
>
Sub Tank
>
Air PG
Maintenance
Station
>
> Nozzle Recovery
>
Auto Maint.
>
Sub Tank
>
Air PG
Maintenance
Station
>
> Nozzle Recovery
>
Auto Maint.
>
Sub Tank
>
Air PG
>><<
Maintenance
Station
>
> Nozzle Recovery
>
Auto Maint.
>
Sub Tank
>
Air PG
>><<
Maintenance
Station
>
> Nozzle Recovery
>
Auto Maint.
>
Sub Tank
>
Air PG
>><<
Maintenance
Station
>
> Nozzle Recovery
>
Auto Maint.
>
Sub Tank
>
Air PG
>><<
Maintenance
Station
>
> Nozzle Recovery
>
Auto Maint.
>
Sub Tank
>
Air PG
>><<
Maintenance
Replace Ink Tank
>
>><<
REMOTEMENU
TEST PRINT /
CLEANING
3200mm
Local <Setup 1>
REMOTEMENU
TEST PRINT /
CLEANING
3200mm
Local <Setup 1>
REMOTEMENU
TEST PRINT /
CLEANING
3200mm
Local <Setup 1>
PRE PRINT POST
30°/40°30°/35°40°/50°
PRE PRINT POST
30°/40°30°/35°40°/50°
PRE PRINT POST
30°/40°30°/35°40°/50°
 Press the key to perform “Station maintenance”.
The Station MENU can be displayed easily without selecting [MENU]-[Maintenance] from Local.
Press the [SEL] key to display “TEST PRINT/CLEANING” for [FUNC2] , and then press the [FUNC2] key.
:Press this to select Maintenance MENU, or to switch to the
previous screen.
:Press this to use the maintenance function.
:Press this to switch to the next screen.
:Use these to select a setting item.
:Press this to confirm a setting, etc..
Maintenance MENUs at-a-glance