Chapter 1 Before Use
1-2
About installing this
machine
Where to Install This Machine
Secure a suitable installation space before assembling
this machine.
The place of installation must have enough space for not
only this machine itself, but also for the printing operation.
Working Environmental Temperature
Use this machine in an environment of 20 to 30°C to
ensure reliable printing.
The heater temperature may not reach the set value,
depending on the ambient temperature.
About fixing machine
The leg of this machine has the level foot to fix the
machine.
Before turning the power ON, make sure that the printer
body is fixed with the leveling feet. The printer body may
start moving during operation if it is not fixed with the
leveling feet.
Moving This Machine
Model Width Depth Height
Gross
weight
SWJ-320EA
5410mm
(213.0in)
995mm
(39.2in)
1440mm
(56.7 in)
910 kg
(2006.2lb)
• If the place to install the machine is exposed to
strong sunlight around the window, draw a curtain
to prevent the machine from being exposed to
strong sunlight.
6500 mm (255.9 in) or more
500 mm
(19.7in)
or more
1000 mm (39.4in) or more
3000 mm (118.1in) or more
1000 mm (39.4in) or more
500mm
(19.7in)
or more
• When the machine is moved to any place other
than on the same step-free floor, contact your
distributor or our service office.
If you move it by yourself, failure or damage may
occur.
Be sure to request your distributor or our service
office to move this machine.
To Next Page
Loading...
