Chapter 6 Appendix
6-3
6
Ink specifications
Power consumption 6.9KW or less
Recomend
ed Envi-
ronment
Available temp. 20 °C to 30 °C (68°F to 86°F)
Humidity 35 to 65% Rh (No condensation)
Guaranteed temp. 20 °C to 25 °C (68°F to 77°F)
Temperature change ± 10 °C / h or less
Dust 0.15mg/m
3
(Equivalent to normal office level)
Weight Printer main unit 910 kg (2006.0 lb)
Outside
dimensions
Printer main unit
5410 mm(W) x 995 mm(D) x 1440mm(H)
(213.0in(W) x 39.2in(D) x 56.7in(H))
*1. Without deflection of the roll when it is retained at both ends.
*2. The expansion and/or contraction of media is excluded.
*3. The initial meandering of the media which is just set is excluded.
*4. Only if all the following conditions are met:
The media is set in the center of the machine.
The Logical Seek is set to Quality.
When roll holders are used, printing is started on a roll having no deflection.
The take-up device is used.
One roll media is used (except for twin rolls).
*5. “Involuted” for the media take-up direction is recommended.
*6. 65.1dB(A), Operating Condition: Full load Measuring Method: According to clause 1.7.4.2 of Machinery Directive 2006/42/EC
Item Specifications
Supply 2L Ink bottle
Color
Black ink
Cyan ink
Magenta ink
Yellow ink
Ink capacity 2 liter
Shelf life
The period is printed on the ink bottle.
Within three months after opening the package even in the available period.
Storage tempera-
ture
Storage 5 to 30˚C (41 to 86˚F)
Transportation
1 to 60˚C (Storage at temperature of 60˚C (140˚F) is only permitted within 120
hours, and at temperature of 40˚C (104˚F) is permitted within a month.)
• Do not disassemble the ink bottle.
• Ink could freeze if kept in a cold place for an extended period.
• If the ink freezes, thaw it at room temperature (25°C) spending more than three hours before use.However, when you
use the frozen ink, the printing quality becomes degraded due to altered ink. Store ink in the environment where ink may
not freeze.
Item Specifications
To Next Page
Loading...
