4-4
Chapter 4 Maintenance
Cleaning the Media Press
When the media press is covered with lint, dust, etc., a
media cannot be fed normally during printing or dust
sticks to the nozzles, which may result in abnormal
printing.
Clean the media press regularly with a dry cloth or paper
towel.
If there is ink on the media press, wipe it away with a
clean stick dipped in washing liquid for maintenance.
• Turn off the main power and unplug the power
cable before maintenance.
• Do not allow liquids to get inside the product.
Ingress of liquids into the product may lead to
failure, electric shock, or fire.
• When using washing liquid for maintenance, be
sure to wipe it away completely so that none
remains on the media press.
To Next Page
Loading...
