Mindray DC-80 User Manual

Image Optimization 5-73
NOTE:
To ensure the correctness of the results, please select an image with clear follicle
boundary when entering Smart FLC.
5.10.13.2 Operation Controls
Edit ROI
Same as the operation in ROI editing in Smart-V.
Edit/ Undo
Touch [Edit] on touch screen to turn on the editing function. It supports dividing, merging, adding
and deleting of the follicle.
Touch [Undo], [Redo] or [Undo All] on touch screen to undo, redo or cancel previous editing.
Zoom
Same as those in 3D/4D mode.
Comments and Body Marks
Same as those in other modes.
Measurement
2D related measurement can be performed on MPR. For details, please refer to [Advanced
Volume].
Save the image
The Smart FLC supports saving single-frame image only, does not support saving multi-frame cine
file.
5.10.14 Smart Planes CNS
The doctor finds fetus’s sagittal view by judgments on image features, and then makes an
observation. The fetus’s s sagittal view is hard to be detected or cannot be detected sometimes
because of the fetus's move inside.

Mindray DC-80 Specifications

General

Imaging Modes	B, M, Color Doppler, Power Doppler, Pulsed Wave Doppler, Continuous Wave Doppler, Tissue Doppler, 3D/4D Imaging
Probes	Convex, Linear, Phased Array, Volume
Advanced Features	Auto Optimization, Auto EF
Connectivity	DICOM 3.0, USB, HDMI, VGA, Ethernet
Transducer Ports	4
Applications	Abdominal, Cardiac, Obstetrics/Gynecology, Vascular, Small Parts, Musculoskeletal, Urology, Pediatrics, Neonatal
Transducer Types	Convex, Linear, Phased Array, Volume
Power Supply	100-240V AC, 50/60Hz
Operating Temperature	10°C to 40°C
Storage Temperature	-20°C to 60°C
Humidity	30% to 80%