Mindray DC-80 User Manual

5-72 Image Optimization
Other Operation
iLive does not support Inversion mode.
 Zoom
Same as those in 3D/4D mode.
 Rotation
Roll the trackball to view sectional images as necessary; you can rotate <M>, <PW>, <Color> to
perform axial rotation or rotate <4D> knob to adjust the nearest VOI section (cut plane) position.
 Comments and Body Marks
Same as those in other modes.
5.10.13 Smart FLC (Smart Follicles Calculation)
CAUTION:
Smart FLC result is provided for reference only, not for confirming a diagnosis.
Note: Smart FLC is an optional function, and it is not available in Smart 3D mode.
The probe D7-2E, D8-2E, D6-2NE, DE11-3E and DE10-3E support the Smart FLC function.
5.10.13.1 Basic Procedures
1. Acquire necessary 3D/4D data and freeze.
2. Touch [Smart FLC] tab on the touch screen to enter Smart FLC, and the system is in the ―Edit
ROI‖ status ([Edit ROI] button is highlighted in green);
3. Set the position and size of the ROI box.
4. Touch [Calc] on the touch screen.
5. Auto calculation is finished:
 Section image (A, B, C) is enclosed with colored lines and the color corresponds to the
follicle in VR window.
 3D image (VR);
 Results on the right of the screen are displayed in a table. Includes:
V: volume
d1, d2, d3: diameters of the follicle
MD: mean diameter of the follicle

Mindray DC-80 Specifications

General

Imaging Modes	B, M, Color Doppler, Power Doppler, Pulsed Wave Doppler, Continuous Wave Doppler, Tissue Doppler, 3D/4D Imaging
Probes	Convex, Linear, Phased Array, Volume
Advanced Features	Auto Optimization, Auto EF
Connectivity	DICOM 3.0, USB, HDMI, VGA, Ethernet
Transducer Ports	4
Applications	Abdominal, Cardiac, Obstetrics/Gynecology, Vascular, Small Parts, Musculoskeletal, Urology, Pediatrics, Neonatal
Transducer Types	Convex, Linear, Phased Array, Volume
Power Supply	100-240V AC, 50/60Hz
Operating Temperature	10°C to 40°C
Storage Temperature	-20°C to 60°C
Humidity	30% to 80%