Mindray DC-80 User Manual

12-4 Setup
Type
Item
Description
Screen
Saver
Screen Saver
Select the different saver methods to the system.
After enabling the screen saver, check ―Mindray‖ to
select the image from the system. Or click [Review] to
select the image on your own.
To set the waiting time before the system enters
dormancy status in the drop-down list beside ―Wait‖.
The system enters screen saver automatically if the
system waiting time exceeds the screen saver already
set.
The system enters screen saver automatically if the
system waiting time exceeds the screen saver already
set and standby time.
12.1.3 Image Preset
Open the page via [Setup]-> [System]-> [Image].
Type
Item
Description
Reset Config
Probe
To set the default probe model for the system from the
drop-down list.
The default parameters are applied to the new probe if
checking Use the default setting when start a new
exam.
MITI
/
To set the TIC, TIS and TIB value of the selected
probe.
Image storage
Image size
Set the standard for saving the image or using the
digital/graph printer.

Mindray DC-80 Specifications

General

Imaging Modes	B, M, Color Doppler, Power Doppler, Pulsed Wave Doppler, Continuous Wave Doppler, Tissue Doppler, 3D/4D Imaging
Probes	Convex, Linear, Phased Array, Volume
Advanced Features	Auto Optimization, Auto EF
Connectivity	DICOM 3.0, USB, HDMI, VGA, Ethernet
Transducer Ports	4
Applications	Abdominal, Cardiac, Obstetrics/Gynecology, Vascular, Small Parts, Musculoskeletal, Urology, Pediatrics, Neonatal
Transducer Types	Convex, Linear, Phased Array, Volume
Power Supply	100-240V AC, 50/60Hz
Operating Temperature	10°C to 40°C
Storage Temperature	-20°C to 60°C
Humidity	30% to 80%