Mindray DC-80 User Manual

iWorks (Auto Workflow Protocol) D-5
D.8.3 Create New Protocol
You can create user-defined protocols and customize the automated procedure.
1. In the iWorks preset screen, click [Add Protocol] to create a new protocol, enter the protocol name,
type and select the application region.
Or you can select an existed protocol and click [Copy] to customize the protocol based on the
previous template.
2. Click [Add View] to enter the view name, and perform image settings, as shown in the following
figure.
3. Perform comments, body mark, measurement settings, as shown in the following figure:

Mindray DC-80 Specifications

General

Imaging Modes	B, M, Color Doppler, Power Doppler, Pulsed Wave Doppler, Continuous Wave Doppler, Tissue Doppler, 3D/4D Imaging
Probes	Convex, Linear, Phased Array, Volume
Advanced Features	Auto Optimization, Auto EF
Connectivity	DICOM 3.0, USB, HDMI, VGA, Ethernet
Transducer Ports	4
Applications	Abdominal, Cardiac, Obstetrics/Gynecology, Vascular, Small Parts, Musculoskeletal, Urology, Pediatrics, Neonatal
Transducer Types	Convex, Linear, Phased Array, Volume
Power Supply	100-240V AC, 50/60Hz
Operating Temperature	10°C to 40°C
Storage Temperature	-20°C to 60°C
Humidity	30% to 80%