Probes and Biopsy 13-35
4. Hold the transducer. Press the biopsy needle pressure position to separate it from needle
guided V-shaped block.
5. Put the needle into the needle guided-bracket, and the needle leans to V-shaped block.
6. Hold the transducer, and release the pressure position of the needle. Adjust the needle-type
adjusting nut manually (following the direction of the arrow). The needle moves smoothly at
the vertical direction due to its gravity.
Ensure that all guide parts are properly fixed prior to performing a
biopsy.
To Next Page
Loading...
Need help?
General
