Minebea Intec Combics Series User Manual

19
Service Manual Combics
Operating Design | Service Mhhode Combics3
Configuring the A/D converter Combics | 1 | 2
Open the menu access switch
t Remove the cap that covers the menu access switch on the back of the indicator
t Slide the switch to the left (= "open position")
Enter the service password as described above (202122), confirm with the ) key and
scroll back using the ( key.
y The device is now in Service mode. The letter S is displayed on the right in the Setup
menu header.
t Select the "SETUP" menu item:
Press the ) key.
t Select weighing platform and confirm:
Press the ) key.
t Select the "INTERNAL" menu item:
t Press the ) key
setup
)
WP 1
)
INTERNAL
)
S
S
S
o

Minebea Intec Combics Series Specifications

General

Brand	Minebea Intec
Model	Combics Series
Category	Scales
Language	English