25
Service Manual Combics
y The letter "S " is displayed in the Setup menu header.
The device is now in Service mode.
y The Setup menu has been expanded along with the User menu.
To view or change device parameters in Setup mode:
t Select the Device parameters" menu.
Open the menu.
y The Device sub menu will open.
Select and open the desired menu item of the next lowest level. Repeat this
procedure until the desired menu item in the lowest menu level can be opened.
View the menu item, change if necessary (confirm with the > soft key) and return
to the highest level of the Setup menu via the < soft key
(press several times if necessary).
t Select a weighing platform (e.g. "WP 1") and confirm with the > soft key.
Operating Design | Service Mode Combics 3 ADC configuration
WP 1
WP 2
COM 1
COM 2
I/O control
Bar code
Printer log
Operating parameters
Clock
Test I/O ports
Passwords
Maintenance
Terminal data
SQmin
Alibi Memory
To Next Page
Loading...
Need help?
General
